Auto Joiner

Hi Guys,

I have the Auto Joinder to join two rooms on startup. Was working great until the update to 5a and now it will only join the first room and sometimes not even that one. I have had some problems with the script disconnecting as well but I think the updates within the G Doctor have fixed that.

Any idea on why the room joiner will not go into the second room?

- John

Editted by The Gate Keeper : fixed up header

Mine works fine, make sure you have it turned on and the room added.

Mine works fine, make sure you have it turned on and the room added.

Molson,

Thank you for the reply. As I mentioned above the joiner worked fine since the upgrade. Now only the first room joins and the second does not. Both of them joined at first and was working great. I have re-checked per your suggestion and both rooms are added the item is turned on. As I said, one of them does join so I do not think there is a problem with the joiner itself.

Notes:

1. Both are group rooms

2. Both worked at first

3. First problem started after update.

Thanks for the help.

- John

check if there are any new updates, it should do the job fine. As molson said, make sure you have the tickbox for room joiner on, as well as the ticks for all the rooms.

check if there are any new updates, it should do the job fine. As molson said, make sure you have the tickbox for room joiner on, as well as the ticks for all the rooms.

Thanks for both of your replies. Let me type out exactly what I have done and what is wrong.

I have checked within the auto joiner settings. The auto joiner is checked as well as both of the rooms that I want to enter. I have downloaded all updated that are available as of about one hour ago. ( I will keep checking)

Problem:

Room 1 will auto join sometimes. Usually if it does not I just restart the script and then it auto joins. Room 2 has not auto joined since I updated to 5a about a week or so ago.

I have tried removing both of the rooms and adding them again. Same problem. As mentioned, sometimes room 1 joins and the other does not and sometimes neither of them join. That is where I am getting confused. I figured that if both of them did not join then maybe there is a problem on the script but one does join most of the time. I just cannot figure out why the other one will not. I can join the room manually just fine so I am not sure what to do next? Has anyone else had this problem?

- John

i think i know what the problem is, it will be friday/saturday before the next update though. So yes, please wait till then, i should have the problem solved by then.

Thanks... I await the update anxiously.