This is from Netgirl. I found this very useful. 
If U're using or planning to use a plain irc /// a mirc with no connection and U want to connect to SparkPea server(s) and U want to Join into SPCN Room(s).
Of course, Auth and cookies Update would be automatically done as part of the process, U don't have to worry about that until one or more servers get upgraded which doesn't happen so often.
But, if & when that does happen U'll get notified about the cahnges & U'll be aware of such thru chat rooms/ server messages.
============================
THERE ARE 5 DIFFERENT SERVERS ON SPARKPEA/SPCN.. Some Rooms/categories are on one server whereas other rooms/categories are on other server(s).
U need a valid E-Mail/Passport/ and make sure to have it registered with SPARKPEA.. at Sparkpea Home page: http://www.sparkpea.net/
So... U can do it the way I do it,,, that's how I do connect:
I've added this in Remote:
on *:start: {
server -m irc.sparkpea.net 6667
}
on *:connect: {
./NICKSERV IDENTIFY passport password
}
of course that would be without the . ^^
that would connect U to Server 1
make sure to use a valid E-Mail/Passport for that and make sure to have it registered with SPARKPEA..
============================
then in Popups/status
I've added these:
connect server 1 : /server -m one.irc.sparkpea.net 6667 | nickserv
connect server 2 : /server -m two.irc.sparkpea.net 6667 | nickserv
connect server 3 : /server -m three.irc.sparkpea.net 6667 | nickserv
connect server 4 : /server -m four.irc.sparkpea.net 6667 | nickserv
connect server 5 : /server -m five.irc.sparkpea.net 6667 | nickserv
-
or these ones that are listed here under, but they are the same,, until one or more servers get upgraded.
But, if & when that happens U'll get notified about the cahnges thru chat rooms/ server messages.
so U can use either, the ones above or the ones below.. I myself use the ones above .
connect server 1 : /server -m 72.36.134.234 6667 | nickserv
connect server 2 : /server -m 72.36.134.235 6667 | nickserv
connect server 3 : /server -m 72.232.95.138 6667 | nickserv
connect server 4 : /server -m 72.232.95.139 6667 | nickserv
connect server 5 : /server -m 72.232.95.140 6667 | nickserv
-
always Save and Exit.
close your SCRIPT then Restart it/ if It's behind a FireWall, allow access
U're connected to server One now...
to get a list of rooms on any particular server, , in its status window type: /list and hit enter /select and join into your room. or as U normaly do, join into the room U wish to get to.
But if U want to connect to more servers or if your room is not on server One do this:
on the Main Status Window right click/ pick and choose the server that match your need/where your room is. Then, again to get a list of rooms on that particular server, , in its status window again type:
if U get this error message on that status window: blah blah blah No such channel ..
that means your channel is not on that server U just got connected to.. so try to connect to a different server. keep on trying until server U are connected to matchs the Room U desire to join in,, or the other way around,, lol.
Always close unused Server Status Windows. if U like
============================
But if U wana join into different rooms located on more than one Server,, then should get connected to all 5 servers at once, or as many as U want, U can do it this way:
in Remote add these:
on *:start: {
server -m one.irc.sparkpea.net 6667
server -m two.irc.sparkpea.net 6667
server -m three.irc.sparkpea.net 6667
server -m four.irc.sparkpea.net 6667
server -m five.irc.sparkpea.net 6667
}
on *:connect: {
./NICKSERV IDENTIFY passport password
}
again, without the . ^^
that would get U connected to all 5 servers at once
again make sure to use a valid E-Mail/Passport for that and make sure to have it registered with SPARKPEA..
then again in Popups/status I've got these:
connect server 1 : /server -m one.irc.sparkpea.net 6667 | nickserv
connect server 2 : /server -m two.irc.sparkpea.net 6667 | nickserv
connect server 3 : /server -m three.irc.sparkpea.net 6667 | nickserv
connect server 4 : /server -m four.irc.sparkpea.net 6667 | nickserv
connect server 5 : /server -m five.irc.sparkpea.net 6667 | nickserv
-
or these that are listed below, they are the same tho as I stated above. lol,,, I myself use the ones above.
connect server 1 : /server -m 72.36.134.234 6667 | nickserv
connect server 2 : /server -m 72.36.134.235 6667 | nickserv
connect server 3 : /server -m 72.232.95.138 6667 | nickserv
connect server 4 : /server -m 72.232.95.139 6667 | nickserv
connect server 5 : /server -m 72.232.95.140 6667 | nickserv
-
always Save and Exit.
close your SCRIPT then Restart it/ if It's behind a FireWall, allow access
U're now connected to all 5 Servers. But if one or more have failed to connect then, again right click on main status window/ pick and choose the server(s) U need to connect to
to get a list of rooms on any particular server, , in its status window type: /list and hit enter/select and join into the room(s) U wish to. or U can join your room the old fashion way: /join %#blah\bblah\bblah
if U get this error message on that status window: blah blah blah No such channel ..
that means your channel is not on that server U just got connected to.. so try to connect to a different server. keep on trying until server U are connected to matchs the Room U desire to join in.. or the other way around,, lol.
Always close unused Server Status Windows. if U like
that's it..
Happy Scripting.. Jami_Net